Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.ufpso.edu.co/jspui/handle/123456789/3446
Título : Thermochemical conversion of coal and biomass blends in a top-lit updraft fixed bed reactor: Experimental assessment of the ignition front propagation velocity
Autor : Quintero Coronel, Daniel Andrés
Lenis Rodas, Yuhan Arley
Corredor Martinez, Lesme Antonio
Gonzalez Quiroga, Arturo
Palabras clave : TLUD, combustión, gasificación, propagación frontal, gas de síntesis, velocidad de combustión
Fecha de publicación : 1-abr-2021
Editorial : Henrik Lund
Citación : Quintero-Coronel DA, Lenis-Rodas YA, Corredor LA, Perreault P, GonzalezQuiroga A, Thermochemical conversion of coal and biomass blends in a top-lit updraft fixed bed reactor: experimental assessment of the ignition front propagation velocity, Energy, https://doi.org/10.1016/ j.energy.2020.119702.
Citación : GITYD;ART02112
Resumen : Co-thermochemical conversion of coal and biomass can potentially decrease the use of fossil carbon and pollutant emissions. This work presents experimental results for the so-called top-lit updraft fixed bed reactor, in which the ignition front starts at the top and propagates downward while the gas product flows upwards. The study focuses on the ignition front propagation velocity for the co-thermochemical conversion of palm kernel shell and high-volatile bituminous coal. Within the range of assessed air superficial velocities, the process occurred under gasification and near stoichiometric conditions. Under gasification conditions increasing coal particle size from 7.1 to 22 mm decreased ignition front velocity by around 26% regardless of the coal volume percentage. Furthermore, increasing coal volume percentage and decreasing coal particle size result in product gas with higher energy content. For the operation near stoichiometric conditions, increasing coal volume percentage from 10 to 30% negatively affected the ignition front velocity directly proportional to its particle size. Additional experiments confirmed a linear dependence of ignition front velocity on air superficial velocity. Further steps in the development of the top-lit updraft technology are implementing continuous solids feeding and variable cross-sectional area and optimizing coal particle size distribution.
URI : http://repositorio.ufpso.edu.co/jspui/handle/123456789/3446
ISSN : ISSN:0360-5442
Aparece en las colecciones: Artículos

Ficheros en este ítem:
No hay ficheros asociados a este ítem.


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons