Please use this identifier to cite or link to this item: http://repositorio.ufpso.edu.co/jspui/handle/123456789/3400
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGuerrero-Gómez, G.
dc.contributor.authorEscobar-Mora, N.J.
dc.contributor.authorNolasco-Serna, C.
dc.coverage.spatialOcaña, Norte de Santander, Colombia.en_US
dc.date.accessioned2021-09-25T05:58:04Z
dc.date.available2021-09-25T05:58:04Z
dc.date.issued2019-11-01
dc.identifier.citationG Guerrero-Gómez et al 2019 J. Phys.: Conf. Ser. 1386 012081en_US
dc.identifier.issn1742-6596en_US
dc.identifier.urihttp://repositorio.ufpso.edu.co/jspui/handle/123456789/3400
dc.description.abstractIt is presents the characterization of the clays from the algodonal formation and the mechanical properties of the products manufactured in brickyard “Hora”, located in Ocaña, Norte de Santander, Colombia.Tests of scanning electron microscopy, thermal gravimetric analysis, differential scanning calorimetry, initial rate of absorption, 24-hour immersion, compressive strength, and modulus of rupture were performed. The results indicate that the clay contains a considerable amount of silico-aluminate, while the products have low mechanical strength and high percentage of water absorption. The clays used present difficulty in the process of shaping and compacting the products. None of the samples comply with the values established in the standard and do not allow their use as non-structural masonry products for interior or exterior use.en_US
dc.description.sponsorshipUniversidad Francisco de Paula Santander Ocaña, Colombia.en_US
dc.description.tableofcontentsspa
dc.format.mimetypespa
dc.language.isoengen_US
dc.publisherEly Dannieren_US
dc.relationhttps://iopscience.iop.org/en_US
dc.relation.ispartofseriesGITYD;ART65
dc.relation.uri
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/2.5/co/*
dc.subjectEvaluación, comportamiento, térmico, arcillas, formación, algodonal, impacto, propiedades, tecnológicasen_US
dc.titleThermal behavior evaluation of clays from algodonal formation and their impact on technological propertiesen_US
dc.typeArtículoen_US
dc.title.translatedEvaluación del comportamiento térmico de arcillas de formación algodonal y su impacto en propiedades tecnológicasen_US
dc.description.abstractenglishIt is presents the characterization of the clays from the algodonal formation and the mechanical properties of the products manufactured in brickyard “Hora”, located in Ocaña, Norte de Santander, Colombia.Tests of scanning electron microscopy, thermal gravimetric analysis, differential scanning calorimetry, initial rate of absorption, 24-hour immersion, compressive strength, and modulus of rupture were performed. The results indicate that the clay contains a considerable amount of silico-aluminate, while the products have low mechanical strength and high percentage of water absorption. The clays used present difficulty in the process of shaping and compacting the products. None of the samples comply with the values established in the standard and do not allow their use as non-structural masonry products for interior or exterior use.en_US
dc.subject.proposalspa
dc.subject.keywordsEvaluation, behavior, thermal, clays, formation, cotton, impact, properties, technologicalen_US
dc.subject.lembspa
dc.identifier.instnameinstname:Universidad Francisco de Paula Santander Ocañaspa
dc.identifier.reponamereponame:Repositorio Institucional UFPSO
dc.identifier.repourlrepourl:https://repositorio.ufpso.edu.cospa
dc.publisher.facultyFacultad ingenieríasen_US
dc.publisher.grantorUniversidad Francisco de Paula Santander Ocañaspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.accessrightshttp://purl.org/coar/access_right/c_abf2
dc.rights.creativecommonsAtribución-NoComercial-SinDerivadas 2.5 Colombia*
dc.rights.localspa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501
dc.type.driverinfo:eu-repo/semantics/article
dc.type.localArtículoen_US
dc.type.redcolArtículo de investigación http://purl.org/redcol/resource_type/ART Artículo de divulgación http://purl.org/redcol/resource_type/ARTDIVspa
dc.relation.referencesDíaz Rodríguez L A and Torrecillas R 2002 Arcillas cerámicas: una revisión de sus distintos tipos, significados y aplicaciones Boletín de la Sociedad Española de Cerámica y Vidrio 41 459–470en_US
dc.relation.referencesSantos Amado J D, Malagón Villafrades P Y and Córdoba Tuta E M 2011 Caracterización de arcillas y preparación de pastas cerámicas para la fabricación de tejas y ladrillos en la región de Barichara, Santander Dyna 78 53–61en_US
dc.relation.referencesMuñoz Meneses R A, Muñoz Chaves J A, Mancilla P and Rodríguez-Páez J E 2007 Caracterización fisicoquímica de arcillas del municipio de Guapi – costa pacífica caucana (Colombia) Revista de la Academia Colombiana de Ciencias Exactas, Físicas y Naturales 31 547–544en_US
dc.relation.referencesGelves Díaz J F, Sánchez Molina J and Peña Rodríguez G 2009 Comportamiento de las arcillas del área metropolitana de Cúcuta sometidas a proceso de moldeo por extrusión Revista Respuestas 14 32–38en_US
dc.relation.referencesRozo S, Sánchez J y Alvarez D 2014 Propiedades físico mecánicas de bloques H10 fabricados en el área metropolitana de Cúcuta Ciencia e Ingeniería Neogranadina 24 67-78en_US
dc.relation.referencesAsociación Colombiana de Ingeniería sísmica (AIS) 2010 Reglamento colombiano de construcción sismo resistente, NSR-10 (Colombia: Asociación Colombiana de Ingeniería sísmica)en_US
dc.relation.referencesAranguren A, Sancho J M, Sanz B and Planas J 2011 Método de caracterización de las propiedades mecánicas de la fractura del ladrillo Anales de Mecánica de la Fractura 2 725–730en_US
dc.relation.referencesAfanador García N, Guerrero Gómez G and Monroy Sepulveda R 2012 Propiedades físicas mecánicas en ladrillos macizos cerámicos para mampostería Ciencia e Ingeniería Neogranadina 22 43-58en_US
dc.type.hasversioninfo:eu-repo/semantics/acceptedVersion
dc.identifier.DOI10.1088/1742-6596/1386/1/012081en_US
Appears in Collections:Artículos

Files in This Item:
There are no files associated with this item.


This item is licensed under a Creative Commons License Creative Commons