Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.ufpso.edu.co/jspui/handle/123456789/3400
Título : Thermal behavior evaluation of clays from algodonal formation and their impact on technological properties
Autor : Guerrero-Gómez, G.
Escobar-Mora, N.J.
Nolasco-Serna, C.
Palabras clave : Evaluación, comportamiento, térmico, arcillas, formación, algodonal, impacto, propiedades, tecnológicas
Fecha de publicación : 1-nov-2019
Editorial : Ely Dannier
Citación : G Guerrero-Gómez et al 2019 J. Phys.: Conf. Ser. 1386 012081
Citación : GITYD;ART65
Resumen : It is presents the characterization of the clays from the algodonal formation and the mechanical properties of the products manufactured in brickyard “Hora”, located in Ocaña, Norte de Santander, Colombia.Tests of scanning electron microscopy, thermal gravimetric analysis, differential scanning calorimetry, initial rate of absorption, 24-hour immersion, compressive strength, and modulus of rupture were performed. The results indicate that the clay contains a considerable amount of silico-aluminate, while the products have low mechanical strength and high percentage of water absorption. The clays used present difficulty in the process of shaping and compacting the products. None of the samples comply with the values established in the standard and do not allow their use as non-structural masonry products for interior or exterior use.
URI : http://repositorio.ufpso.edu.co/jspui/handle/123456789/3400
ISSN : 1742-6596
Aparece en las colecciones: Artículos

Ficheros en este ítem:
No hay ficheros asociados a este ítem.


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons