Please use this identifier to cite or link to this item: http://repositorio.ufpso.edu.co/jspui/handle/123456789/3400
Title: Thermal behavior evaluation of clays from algodonal formation and their impact on technological properties
Authors: Guerrero-Gómez, G.
Escobar-Mora, N.J.
Nolasco-Serna, C.
Keywords: Evaluación, comportamiento, térmico, arcillas, formación, algodonal, impacto, propiedades, tecnológicas
Issue Date: 1-Nov-2019
Publisher: Ely Dannier
Citation: G Guerrero-Gómez et al 2019 J. Phys.: Conf. Ser. 1386 012081
Series/Report no.: GITYD;ART65
Abstract: It is presents the characterization of the clays from the algodonal formation and the mechanical properties of the products manufactured in brickyard “Hora”, located in Ocaña, Norte de Santander, Colombia.Tests of scanning electron microscopy, thermal gravimetric analysis, differential scanning calorimetry, initial rate of absorption, 24-hour immersion, compressive strength, and modulus of rupture were performed. The results indicate that the clay contains a considerable amount of silico-aluminate, while the products have low mechanical strength and high percentage of water absorption. The clays used present difficulty in the process of shaping and compacting the products. None of the samples comply with the values established in the standard and do not allow their use as non-structural masonry products for interior or exterior use.
URI: http://repositorio.ufpso.edu.co/jspui/handle/123456789/3400
ISSN: 1742-6596
Appears in Collections:Artículos

Files in This Item:
There are no files associated with this item.


This item is licensed under a Creative Commons License Creative Commons