Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.ufpso.edu.co/jspui/handle/123456789/3299
Título : Physical analysis of building materials with soil
Autor : Jaramillo, Haidee Yulady
Goméz, July Andrea
Martínez, C.A
Palabras clave : Física, análisis, materiales de construcción, suelo.
Fecha de publicación : 5-dic-2020
Editorial : Ely Dannier
Citación : H Y Jaramillo et al 2020 J. Phys.: Conf. Ser. 1708 012017
Citación : GINSTI;ART07
Resumen : . Industrialization in construction has allowed the use of materials such as concrete and steel, these being essential for the construction of large buildings and structures, however, in some vulnerable areas, using this type of techniques and materials represents a high cost, due to which the traditional or vernacular architecture is a sustainable alternative. This research carries out a physical analysis of the materials used in the constructions on land that are developed in the municipality of Ocaña, Norte de Santander, Colombia. The results obtained indicate that the soil used in the analyzed structures has a maximum density of 1.41 g/cm3 with a humidity percentage of 32.55%; likewise, in natural condition these soils have a liquid limit of 67.85 a limit plastic of 45.72 and a plasticity index of 22.13. In other words, the soil has characteristic plastic characteristics of a fine soil. This corresponds to the granulometric classification of the soil, which corresponds to a high plasticity Silt, which has sands with diameters between 395 µm and 76.1 µm. It also has a specific gravity of 2.65 g/cm3
URI : http://repositorio.ufpso.edu.co/jspui/handle/123456789/3299
ISSN : 1742-6596
Aparece en las colecciones: Artículos

Ficheros en este ítem:
No hay ficheros asociados a este ítem.


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons